Journal of Orthodontic Science

ORIGINAL ARTICLE
Year
: 2018  |  Volume : 7  |  Issue : 1  |  Page : 23-

Effect of different surface treatments and bonding modalities on the shear bond strength between metallic orthodontic brackets and glazed monolithic zirconia crowns


Jamal Y Amer1, Mohammad M Rayyan2 
1 Department of Developmental Sciences-Orthodontics, Faculty of Dentistry, Beirut Arab University, Lebanon
2 Department of Oral Rehabilitation Sciences, Faculty of Dentistry, Beirut Arab University, Lebanon

Correspondence Address:
Dr. Jamal Y Amer
Baakline – Chouf, Mount Lebanon
Lebanon

OBJECTIVE: To evaluate the effect of different surface treatments and bonding modalities on the shear bond strength (SBS) between metallic orthodontic brackets and zirconia crowns. MATERIALS AND METHODS: Sixty zirconia specimens were computer-aided design/computer-aided manufacturing milled, sintered, glazed, and embedded in acrylic resin. The specimens were divided into three groups according to the surface treatment applied: C: no surface treatment (control), S: sandblasted with 50 μm Al2O3, and D: Sof-Lex disc roughening. Each group was further subdivided into two subgroups according to the resin cement used: P: Clearfil Ceramic Primer + Panavia F2.0 (Kuraray) and R: RelyX U200 (3M/ESPE). Metallic orthodontic brackets were bonded to the labial surface of the specimens. All specimens underwent thermocycling. SBS test was applied using a universal test machine at a cross head speed of 1 mm/min. Data were analyzed using Mann–Whitney test (α = 0.05). RESULTS: Subgroup SP showed the highest SBS (20.8 ± 4.8 MPa), followed by subgroups SR (16.7 ± 4.6 MPa), DP (12.3 ± 2.8 MPa), and DR (11.6 ± 3 MPa). However, all specimens in the control group underwent debonding during thermocycling. The different surface treatment groups showed highly significant differences (P < 0.05), whereas the resin cement subgroups showed no significant differences (P > 0.05). CONCLUSION: SBS between glazed zirconia crowns and metallic brackets strongly depended on the surface treatment applied. Sandblasting achieved the highest SBS. Roughening with Sof-Lex disc proved to be a reliable surface treatment modality for glazed zirconia. Bonding to untreated glazed zirconia surfaces led to bond failure. Both resin cements yielded strong SBS results.


How to cite this article:
Amer JY, Rayyan MM. Effect of different surface treatments and bonding modalities on the shear bond strength between metallic orthodontic brackets and glazed monolithic zirconia crowns.J Orthodont Sci 2018;7:23-23


How to cite this URL:
Amer JY, Rayyan MM. Effect of different surface treatments and bonding modalities on the shear bond strength between metallic orthodontic brackets and glazed monolithic zirconia crowns. J Orthodont Sci [serial online] 2018 [cited 2018 Dec 12 ];7:23-23
Available from: http://www.jorthodsci.org/article.asp?issn=2278-0203;year=2018;volume=7;issue=1;spage=23;epage=23;aulast=Amer;type=0